MAGNETIC BASE DRILL HOLEMAKER PRO 110

Product code HMPRO110

The Holemaker PRO 110 is an extra heavy duty, large capacity machine capable of producing burr-free holes up to 110mm diameter by 110mm depth. 1650w motor with 4-speed mechanical gearbox produces superb torque through gear reduction in low speeds. #4 morse taper spindle bore for use with taper shank drills, tapping head (M30 Capacity) and taper shank reamers.

Supplied complete with side mounted coolant system and arbor for use with 3/4” shank Holemaker Cutters up to 75mm diameter and 75mm depth of cut. Optional arbor to take 1-1/4″ shank cutters up to 110mm diameter and 110mm depth. 1L pressure feed coolant bottle available, recommended for use with large diameter and depth hole drilling.

 

SPECIFICATIONS:
Capacity (Diameter – max) 110mm
Capacity (Depth of Cut – max) 110mm
Capacity ( Twist Drills)
 
#4 Morse Taper 47mm
Motor Input Power 1800 Watt
Motor Output Power 1650 Watt
Gearbox  4 Speed 
Heavy Duty
85/135/160/250RPM
Magnet Dead Lift 22000nm
Weight 31.0kg

 

Large Holes WITH THE HOLEMAKER PRO 110
Holemaker Annular Cutters are available up to 75mm Diameter with a standard 3/4″ weldon shank.

61mm to 150mm Diameter cutters are available with a 1-1/4″ shank, to help increase the strength of the cutter.

The Holemaker Pro 110 is supplied standardly with #4 Morse Taper arbor for use with 3/4” shank Holemaker Cutters up to 75mm diameter and 75mm depth of cut.

Alternatively The Pro 110 can be ordered with a number of different #4 Morse Taper arbors, depending on your specific job requirements.

When drilling large diameter or deep holes with the Holemaker Pro 110, the optional 1100mL pressure feed coolant tank is highly beneficial.

The pressure feed tank will increase the coolant flow to the centre of the cut, and will also allow for larger cuts to be completed, without having to re-fill the coolant tank during the cutting process.

Part# SA-WPB
Description: 1100mL Pressure Feed Coolant Bottle