The Kincrome Air Compressor will easily inflate a 31×10.5R15 4WD tyre within 2 minutes up to 20 consecutive times before the automatic thermal shutdown switch could activate.
• Cast alloy casing with heatsink for rapid heat dissipation. • Screw on air filter with easily replaceable element for clean air intake, ensuring extended life of the compressor. • High performance PTFE piston ring and stainless steel valves. • Quiet, high efficiency gearless direct drive design. • Protective alloy base tray for stability and protection against dirt ingress. • 5 Metre coil-hose with heavy duty pressure gauge. Includes a nitto snap-on fitting and clamp on tyre connector. Also includes a unique tyre deflation valve feature. • Nitto air outlet with protective rubber cover • Conveniently located On/Off switch • Rubber feet to reduce vibration. • Powerful .25HP permanent magnet motor drawing 15 to 40 amps max. • 3 Inflating Nozzles • Heavy Duty Gauge • Alloy Sand Tray • Battery Clips • 30amp In-line Fuse • Tough, weather resistant twin compartment carry bag included.
Maximum Air Flow: 72 Litres per minute Maximum Voltage: 13.8 Volt Maximum Amperage Draw: 40 A Maximum Working Pressure: 150 PSI Maximum Ambient Temp: 60°C Minimum Ambient Temp: -55°C Maximum Duty Cycle Time: 40mins @ 40 psi @ 24°C
| Voltage | 12V |
| Max Voltage | 13.8V |
| Max Air Flow | 72 LPM (2.5 CFM) |
| Max Working Pressure | 150 PSI (10.3 BAR) |
| Max Ambient Temp | 60°C |
| Min Ambient Temp | -55°C |
| Max Duty Cycle Time | 40mins @ 40 PSI @ 24°C |
|
Cast Alloy Casing
|